Outdoor Analog Line Level Omnidirectional Microphone
VeriFact® E is an omnidirectional, low impedance, electret condenser microphone with a built-in preamp that is housed inside a single-gang weather-resistant Bell Box®. Design for outdoor applications. Surface mount only. Produces line-level output.
Features:
- Designed for outdoor applications
- Single gang weather-resistant bell box
- Sound Capture within 30′ diameter circle
- Distances up to 1000′ from the Louroe Microphone to a CCTV Camera, Louroe Base Station, or 3rd party monitoring hardware
- Rear Panel Sensitivity Dip Switch, N (Normal Setting, 0db), or L (Low Setting, -6db)
- Easy 3-position Phoenix terminal block connectivity
Power and Cable Connectivity:
- Requires 12Vdc external power, (Recommended DC Power Supply AD-1, LE-242, Click Here)
- Requires Belden 8451, West Penn 452, or similar 2 conductor shielded cable for audio connectivity
Applications:
- Convenience Stores
- Fast Food Restaurants
- Booking Rooms
- Day Care Centers
- Therapy Labs
- Cashier Booths
- Gas Stations
- Anywhere CCTV Cameras Are Installed
Included in: ASK-4® 101E

Recommeneded Hanwha cameras for Louroe microphones
Audio Monitoring Notice

When this equipment is used as part of an audio monitoring system, the law requires that the public be given notice of AUDIO MONITORING ON THE PREMISES.
Two decal notices are included with each microphone shipped.
Federal Law References: Federal Regulations, US Code, Title 18, Crime and Criminal Procedure. Sec 2510.
Documents
Integrators
What's in the box
Verifact E Microphone
Installation Requirements
Belden 8451, West Penn 452, or Equivalent 2 Conductor Shielded Cable. If not used with a Louroe base station, a 12Vdc external power supply is required. (Recommended DC Power Supply AD-1, LE-242)
Compatibility
- All Louroe base stations
- For IP camera with Mic level input refer to the E-ML
- NVR
- video system
Placement
Use Cases
Banking
Education
Healthcare
Law Enforcement
Retail & C-Store
Transportation
Specifications
Microphone Pickup:
Omnidirectional, (360 degrees)
Operating Voltage:
12Vdc
Current Draw:
10ma
Audio Output Level:
Line Level, (0 dBV, 600 ohms @1kHz)
Adjustable Line Level Audio Output:
Rear Panel Sensitivity Dip Switch, N (Normal Setting, 0db), or L (Low Setting, -6db)
Frequency Response:
50 Hz to 15 kHz
Connectivity:
Self termination using a 3-position Phoenix terminal block, (A Terminal, +12Vdc In), (B Terminal, Audio Output), (C Terminal, Power+ Audio Ground)
Dimensions
2.75 W″ x 4.5″ H x 2.125″ D
Microphone Housing:
Single Gang Weather Resistant Di-cast Box
Connectivity Distance:
Up to 1000 ft.
Cable Requirements:
22-24 AWG, 2 Conductor Shielded cable with a 22-24 AWG drain wire (Belden 8451 or West Penn 452)
Certified:
Product Comparison
96 products
Add Product
Audio Streaming
Audio Type
Built-in Preamp
Install Environment
Mic Type
Pick-up Pattern
Pick-up Range
Sensitivity Switch: Normal/Low
Vandal Resistant
Voltage Requirement
Wire Distance
Wire Type
Add a product for comparison
Inquire About This Product
Have a question about the VeriFact® E? Contact us directly.- Hidden
How to Buy
United States and Canada
Louroe sells products through a network of dealers and distributors across the United States and Canada. Find your local Louroe Distributor on the locator portal.
Find a distributorLatin America
Please contact LAR Group, the Louroe representative group for Latin America including the Caribbean.
Contact LAR GroupOther Worldwide Regions
For regions outside of North America, Latin America and the Caribbean, please contact Louroe directly at (888) 265-8474 or via email on our contact form.
Contact UsProduct Finder
Choose a product number or product name to be taken to the product page.